Dell Security SonicWALL Tz500 High Availability (01-SSC-0439)

Availability:

Out of stock


Item code : xxxxN
Last update : 16-03-2020
Model : 01-SSC-0439
Provides an extensible design that enables Service prioritization for data Design that delivers high availability, scalability, and for maximum flexibility and price/performance

$677.70

Out of stock

 

Dell Security SonicWALL Tz500 High Availability (01-SSC-0439) Overview


High Availability allows two identical SonicWall security appliances running SonicOS Enhanced to be configured to provide a reliable, continuous connection to the public Internet.One SonicWall device is configured as the Primary unit, and an identical SonicWall device is configured as the Backup unit. In the event of the failure of the Primary SonicWall, the Backup SonicWall takes over to secure a reliable connection between the protected network and the Internet. Two appliances configured in this way are also known as a High Availability Pair (HA Pair).
High Availability provides a way to share SonicWall licenses between two SonicWall security appliances when one is acting as a high availability system for the other. To use this feature, you must register the SonicWall appliances on MySonicWall as Associated Products. Both appliances must be the same SonicWall model.
Benefits of High Availability
 
High Availability provides the following benefits:

  • Increased network reliability – In a High Availability configuration, the Backup appliance assumes all network responsibilities when the Primary unit fails, ensuring a reliable connection between the protected network and the Internet.
  • Cost-effectiveness – High Availability is a cost-effective option for deployments that provide high availability by using redundant SonicWALL security appliances. You do not need to purchase a second set of licenses for the Backup unit in a High Availability Pair.
  • Virtual MAC for reduced convergence time after failover – The Virtual MAC address setting allows the HA Pair to share the same MAC address, which dramatically reduces convergence time following a failover. Convergence time is the amount of time it takes for the devices in a network to adapt their routing tables to the changes introduced by high availability. By default, the Virtual MAC address is provided by the SonicWALL firmware and is different from the physical MAC address of either the Primary or Backup appliances.


SonicWall High Availability

This must be paired or used in conjunction with an active/primary unit. You can however convert this appliance to an active/primary unit through by purchasing the conversion license for this model.

How High Availability Works
High Availability requires one SonicWall device configured as the Primary SonicWall, and an identical SonicWall device configured as the Backup SonicWall. During normal operation, the Primary SonicWall is in an Active state and the Backup SonicWall in an Idle state. If the Primary device loses connectivity, the Backup SonicWall transitions to Active mode and assumes the configuration and role of Primary, including the interface IP addresses of the configured interfaces. After a failover to the Backup appliance, all the pre-existing network connections must be re-established, including the VPN tunnels that must be re-negotiated.
The failover applies to loss of functionality or network-layer connectivity on the Primary SonicWall. The failover to the Backup SonicWall occurs when critical services are affected, physical (or logical) link failure is detected on monitored interfaces, or when the Primary SonicWall loses power. The Primary and Backup SonicWall devices are currently only capable of performing Active/Idle High Availability or Active/Active UTM – complete Active/Active high availability is not supported at present.
For SonicWall appliances that support PortShield, High Availability requires that PortShield is disabled on all interfaces of both the Primary and Backup appliances prior to configuring the HA Pair. Besides disabling PortShield, SonicWall security appliance configuration is performed on only the Primary SonicWall, with no need to perform any configuration on the Backup SonicWall. The Backup SonicWall maintains a real-time mirrored configuration of the Primary SonicWall via an Ethernet link between the designated HA ports of the appliances. If the firmware configuration becomes corrupted on the Primary SonicWall, the Backup SonicWall automatically refreshes the Primary SonicWall with the last-known-good copy of the configuration preferences.
There are two types of synchronization for all configuration settings: incremental and complete. If the timestamps are in sync and a change is made on the Active unit, an incremental synchronization is pushed to the Idle unit. If the timestamps are out of sync and the Idle unit is available, a complete synchronization is pushed to the Idle unit. When incremental synchronization fails, a complete synchronization is automatically attempted.

Category:

Brand

Sonicwall

SonicWall, originally a private company headquartered in Silicon Valley, and a Dell subsidiary from 2012 to 2016, sells a range of Internet appliances primarily directed at content control and network security.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Dell Security SonicWALL Tz500 High Availability (01-SSC-0439)”

There are no reviews yet.

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Compare
Wishlist 0
Open wishlist page Continue shopping