(Access point) Unifi AC IW Pro

Dimensions: 139.7 x 86.7 x 25.75 mm (5.5 x 3.41 x 1.01″)
Weight: 210 g (7.41 oz)
Networking Interface: (3) 10/100/1000 Ethernet Ports
Button(s): Reset
Power Method: 802.3at PoE+ Supported
Power Supply: UniFi Switch (PoE) (not included)
Power Save: Supported
PoE Out: 48V Pass-Through (Pins 1, 2+; 3, 6-)
Max. Power Consumption: 10W
with PoE Passthrough – 22W*
Max. TX Power:
2.4 GHz – 22 dBm
5 GHz – 22 dBm
MIMO:
2.4 GHz – 3 x 3
5 GHz – 3 x 3
Max. Data Speed:
2.4 GHz – 450 Mbps
5 GHz – 1300 Mbps
Max. Range: 100 m (328′)
Antennas: 3 x Dual-Band Antenna, Single-Polarity
Antenna Gain:
2.4 GHz – 5 dBi
5 GHz – 6.5 dBi
Wi-Fi Standards: 802.11 a/b/g/n/ac
Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
Mounting: 1-Gang Electrical Wall Box (Not Included)
Operating Temperature: -10 to 50° C (14 to 122° F)
Operating Humidity: 5 to 95% Noncondensing
Certifications: CE, FCC, IC
* Requires 802.3at PoE+ switch
ADVANCED TRAFFIC MANAGEMENT
VLAN: 802.1Q
Advanced QoS: Per-User Rate Limiting
Guest Traffic Isolation: Supported
WMM: Voice, Video, Best Effort, and Background
Concurrent Clients: 250+
SUPPORTED DATA RATES (Mbps)
802.11ac – 6.5 Mbps to 1300 Mbps (MCS0 – MCS9 NSS1/2/3, VHT 20/40/80)
802.11n – 6.5 Mbps to 450 Mbps (MCS0 – MCS15, HT 20/40)
802.11a – 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11g – 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b – 1, 2, 5.5, 11 Mbps

Category: Network Accessories

Brand

0.0 overall

There are no reviews yet.

Product code	MTAD-5G-30D3-PA
Antenna gain	30 dBi
Beamwidth	+/-2.5 deg
Connector	2x RP-SMA Female (outside thread)
Cross Polarization	>40 dB
Diameter x Depth	70 x 45cm (27.5 x 17.8in)
Elevation adjustment range	+/- 15 deg
Frequency Range	4.7-5.875 GHz
Front-to-Back Ratio	>30 dB
Impedance	50 ohms
Operating Temperature	-50°C to 80°C(-49°F to 158°F)
Outdoor Rating	ETSI EN 300 019-2-4
Packaged size	73x73x20cm (29x29x8in)
Packaged weight	8.4 kg (18,5)
Polarization	Vertical and Horizontal
Pole Mount Diameter Range	3 to 10cm (1.2 to 3.9in)
Port to Port Isolation	>40dB min
Power Rating	100W
Reflector	Aluminum
Standards	EN 302 326 DN1, DN2, DN3, DN5
VSWR	≤ 1.4 typ, ≤ 1.8 max
Weight	5.7kg (12.6 lbs)
Wind Load (125 mph)	181.4kg (400 lbs)
Wind Survivability	201kph (125mph)

Frequency	5.1-5.8 GHz
Gain	34 dBi
Beamwidth	+45°: 3° (3 dB) -45°: 3° (6 dB)
F/B Ratio	42 dB
Maximum VSWR	1.4:1
Wind Loading	1179 N @ 200 km/h (400 lbf @ 125 mph)
Wind Survivability	200 km/h (125 mph)
Polarization	Dual-linear
Cross-Pol Isolation	35 dB minimum
ETSI Specification	EN 302 326 DN2
Mounting	Universal pole mount, airFiber X radio bracket, and weatherproof RF connectors included
Dimensions	41.34 x 41.34 x 16.57″ (1050 x 1050 x 421 mm)
Weight	29.76 lb (13.5 kg)